1. You as an enumerator will be assigned an enumeration area in which you will do the enumeration work for the Census. Your supervisor will assign this area to you and will also provide you with a map or a sketch showing boundaries of your enumeration area and explain major features of this area in order for you to properly identify the boundaries.

2. Your supervisor will take you around your enumeration area and instruct you with regard to the order in which you will carry out the enumeration. He will specify the order in which the villages should be visited in the rural areas or the streets to be covered in the urban areas. For you to cover your area in an orderly manner you must follow these instructions carefully.

3. Since the co-operation of the people is an essential factor in the success of the Census, your supervisor will introduce you to the local, traditional and Party leaders and other influential persons in the area to solicit their co-operation.
Identification Particulars on Main (Population and Housing) Questionnaire CPHA9001.

Province: (Item 1)
4. Write the name of the province you are operating in in the space provided. You will then enter the province code in box 1. This will be given to you by your supervisor as it appears in Appendix 1.

District: (Item 2)
5. Write the name of the district you are operating in in the space provided, then enter the code, given to you by your supervisor, as it appears in Appendix 1 in boxes 2 and 3.

CSA (Census Supervisory Area): (Item 3)
6. Your supervisor will give you the number of the CSA in which your work area is located. Enter the number in boxes 4 - 6.

Rural / Urban: (Item 4)
7. Write Urban or Rural in the space provided, depending on the area in which you are operating. You will just transfer this information from the map you are using. Enter code 1 for rural or 2 for urban in box 7.

16

SEA (Standard Enumeration Area): (Item 5)
8. This is the area allocated to you for enumeration. Your supervisor will give you your SEA number. Enter the number in box 8 . Enter the check digit given to you in box 9.

Census Building Number (CBN): (Item 6)
9. Within your enumeration area you will give a unique serial number to each building as you continue to enumerate. This number will run serially in each enumerator's area. The number will be in three digits starting with 001, followed by 002, 003 and so on. No two buildings in your enumeration area will have the same 'Census Building Number'. This number will be different from other types of numbers the building may already have, such as house number, plot number, stand number, flat number, etc. The idea is to make sure that all the buildings, and thus housing units, in your area have been covered. This will help you, your supervisor, and anybody else who will be interested in checking on your progress and completeness of coverage. Enter the number in boxes 10 - 12.

Housing Unit Number (HUN) (Item 7)
10. Each housing unit will be given a house number within the building. This number will be in two digits. The first housing unit within any particular building should be given number 01, the second one 02, and so on. Structures not intended for habitation (see para. 36) but actually being used as living quarters at the time of the Census are to be allocated appropriate house numbers.

Examples:

Remember to give it a Census Building Number. Enter the house number in boxes 13 and 14 after writing it out in the space provided.

Household Number (HHN): (Item 8)
11. Each household within a housing unit will be given a one-digit serial number - 1,2,3, etc. If the housing unit is vacant then write `O'against the household number. This will indicate that no one was living there at the time of enumeration. Enter this number in box 15. You will then get the housing particulars for the housing unit.

17

Village/ Locality: (Item 9)
12. In the case of urban areas, enter here the name of the area, compound or township in which this house is located, e.g. Kansenshi, Chelston, Chipata Compound, Chilenje South, etc. In the case of rural areas write the name of the village/locality.

Residential Address: (Item 10)
13. Residential Address is the information that describes the place in such a manner that a person may be able to reach it by this reference. This will include the name or number of street and the location of this particular building on this street. It will also include house/flat number that the house already has, plot number or stand number, or the name of the building if it is commonly known by that name. For example Flat No. 2, Fife Court, Plot 712 Mwalule Road, Longacres. In rural areas, name of the village will suffice. No codes are necessary in this case.

Chief's Area: (Item 11)
14. This information is for the area you are operating in. You should confirm with the respondent the name of the chief for the area. You could come across people who pay allegiance to different chiefs in your area. What you are supposed to put down is the chief of the area. The name should be one of the names given in Appendix 2 of the list of chiefs for the district. If the name given is different or does not appear on the list, probe to find out if there has been any change in the names. If there has not been any, inform your supervisor about. it.

15. Census maps do not show the boundaries of chiefs' areas, therefore for the Central Statistical Office to correctly allocate people according to "Chiefs' Areas", you should be very careful when getting this information. Enter the appropriate code from Appendix 2 in boxes 16 - 18.

Ward: (Item 12)
16. A ward is a political delineation of an area. There may be more than one locality in one ward. The map you are using does not contain ward boundaries, the respondent will tell you the name of the ward in which his housing unit is located. In case he does not know, the 'party chairman- in the area will tell you. Your area might overlap wards, so you should not take it for granted that all the households you are covering should report the same ward. You should first ask before writing this in the space provided. Enter the appropriate codes as they appear in Appendix 9 in boxes 19 - 20.

Institutions/Collective Quarters: (Item 13)

17. Write the name of the Institution in the space provided. This includes Collective living quarters. The codes for institutions/collective living quarters are as follows:

18

Code

1. Hotel/Motel/Inn
2. Hostel/Rest House
3. Hospital
4. Learning Institution
5. Prison/Police Cells
6. Other

Enter the appropriate code in box 21. In case of a normal housing unit draw a line across the space provided and enter 8 in box 21.